Pakistan Virtual Aviation
-------------------------

http://www.Virtual-Aviation.fsnet.co.uk

Islamic Republic of Pakistan - Peshawar International Airport

Version 1.0 - (REQUIRES PATCH SET 1 FOR FS98)

Developed by Jamie Al-Nasir
WebMaster@Virtual-Aviation.fsnet.co.uk


Notes:
------

Peshawar International is small airport which is served by PIA, Emirates
and other domestic airlines. Emirates is the only other Foreign airline
to serve Peshawar.

The city of Peshawar is close to the infamous Khyber Pass which has been a
silent witness to the countless number of invaders, pleasure seekers,
adventurers and soothsayers that have filtered through its narrow gateway over
the centuries. The historic Khyber Pass begins at a distance of 15 miles west of
Peshawar at the Bab-e-Khyber watchtower, which acts as a gateway to the Pass.
The pass ends at the Torkham Border, passing the smugglers' bazaar, Landikotal,
which at a height of 3518 feet straddles the top of this historical passageway.
At Torkham the Durand line separates Pakistan from Afghanistan.


Features...

Aircraft Hangars
Terminal Buildings
Primary Concrete Apron
Control Tower
Revolving Radar on Pylon
High Intensity Yellow Taxiway Centerline Lights at Daytime
High Intensity Green Taxiway Centerline Lights at Nightime
Blue Taxiway Lights at Nightime
Spotlight Pylons
Part of apron Spotlit at Nightime
Lots of Trees around the Airport!
ATIS, Ground Control, Tower Control, Approach Control
ILS, VOR, NDB
Static Aircraft on the Apron
PIA Pushback trucks
PIA Food vehicles
PIA Safety vehicles
Very realistic Car-park (behind Main Terminal)
- Does not contain any cars yet!


Peshawar International includes static aircraft, these are...

PIA Fokker F-27 Friendship at Main Terminal
PIA Airbus A300 at Main Terminal
Emirates Airbus A300 at Main Terminal


NavAids (Navigation Aids):
--------------------------

*******************************************************************
** FOR SIMULATION ONLY - NOT TO BE USED FOR REAL NAVIGATION! **
*******************************************************************

Runways:
Runway 17/35: 9,000' x 150'
Peshawar ATIS: 124.80 MHz
Peshawar Approach: 124.50 MHz
Peshawar Control: 126.20 MHz
Peshawar Ground: 121.30 MHz
ILS: 109.20 MHz
VOR: 114.30 MHz PS
NDB: 308 KHz PS


ARRIVAL PROCEDURE (CallSign PK1)

Contact Approach on 124.5. You will be asked to Intercept the ILS
do so, then contact the Tower.

Contact the Tower on 126.20. You will be cleared to land and told
to contact Ground Control on Touchdown.

Contact Ground Control on 121.30. You will be given instructions on
where to taxi.


DEPARTURE PROCEDURE (CallSign PK2)

Contact Ground Control on 121.30. You will be told to taxi to your
Runway. Then you will be asked to contact Control.

Contact the Control on 126.20. You will be cleared to take off.


*******************************************************************
** THESE PROCEDURES DEVISED FOR FLIGHT SIMULATOR ONLY! **
*******************************************************************


Installation
------------

Extract all the files in the Zip Archive to a temporary folder.

Copy all of the *.bgl files into your Flight Simulator "Scenery" Folder
i.e "C:\Programs\FS98\Scenery" (if you installed flight simulator in
"C:\Programs\FS98\").

There is another Zip Archive called Textures contained within the Main
Zip file. Extract these files to your Flight Simulator "Texture" Folder.
i.e "C:\Programs\FS98\Texture" (if you installed flight simulator in
"C:\Programs\FS98\").

Files that should reside in [Flight Simulator Program Directory]\Scenery
*.BGL
(All the files in the Main Zip Archive)


Files that should reside in [Flight Simulator Program Directory]\Texture
*.R8
*.OAV
*.?AF
(All the files in the Texture Zip Archive)


TroubleShooting
---------------

Problem: Some objects are not being displayed in the airport

Solution: FS98 has a scenery buffer of 256K. Make sure you have the
Microsoft Patch Update #1 installed. Installing Patch Update 1
will increase this to 512K so all objects will be displayed

Problem: Some objects appear to be plain/blank

Solution: Make sure you have copied all the files in the Texture.Zip Archive
to your [Flight Simulator Program Directory]\Texture Folder

Problem: Scenery does not show up in the Airport list

Solution: Click on "Scenery from 6 and before" if it still does not show up
make sure you have copied all the *.BGL files from the Main Zip
Archive to your [Flight Simulator Program Directory]\Scenery Folder


Email me if you are having problems!


Other Credits
-------------

PIA Boeing 737 - K.Simmelink / Livery Jamie Al-Nasir
PIA Airbus A300 - Brian Quayle / Livery Jamie Al-Nasir
Emirates A300 - B.Quayle / F.Cunningham / API provided by Mike Wallace


Thanks to Mike Wallace for providing API Macros.

A special Thanks to Pascal Meziat for Airport Designer,
Manfred Moldenhauer for Scasm and Sclink and
Trevor de Stigter for Model to API.


More Resources:
---------------

For a large collection of Flight Simulator Addons, please visit my
Pakistan Virtual Aviation Website:

http://www.Virtual-Aviation.fsnet.co.uk


Legal:
------

Copyright © 1999-2000 Pakistan Virtual Aviation and respective authors.
All rights reserved.

This Airport is FREEWARE
Any commercial use is strictly prohibited.

You may upload this package to Freeware sites, where
access is free, and you may freely distribute it providing
that the contents of this package are not altered.

Files that comprise this Airport are
property of their respective owners.

This is an acurate and detailed representation of a real Airport.

Pakistan Aviation and respective authors are not liable
(cannot be held responsible) for any loss of data, damage
or liabilites whatsoever that you might incur as a result of
using this product

Pakistan Aviation and respective authors does not give
any warranties, either implied or specific

Use this product at you own risk.


Happy Flying

Jamie Al-Nasir